Skip to main content
Skip table of contents

MAC36NL - BACnet Ethernet - Not possible to select the communication adapter

Issue

In the MAC36NL station, no adapter is available to select in the /Link/AdapterTitle in the EthernetPort component (from the bacnet palette) in /Config/Drivers/BacnetNetwork/bacnetComm/network.

image-20240603-095707.png

Possible cause and solution

The BACnet Ethernet protocol is not supported on the MAC36NL controller.

Solution

The MAC36NL supports the BACnet IP, BACnet MS/TP, and BACnet S/C protocol and they are recommended for use in MAC36NL-family controllers.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.