SubmenuBoolean

The SubmenuBoolean component is responsible for reading/writing and configuration of a single (one of 8 points) Boolean parameter, which is placed in the LP panel submenus. There are 6 submenus in LP panel: Temperature, Fan, Light, Blind, Alarm, and Occupancy, and each submenu can have up to 8 Boolean points.

The SubmenuBoolean component has the following slots:

• Status: shows the point’s status;

• Fault Cause: shows the fault cause description;

• Fault Status: shows the point error status true: point read/write error);

• Enable: enables or disables the point (true: enabled, false: disabled);

• Poll Frequency: allows to set the reading poll frequency (fast, normal, slow);

• Write Type: allows to set the writing mode (COV: only on input change, COV_PollFrequency: on the In slot change and periodically, PollFrequency: only periodically, COV_LinkSet: on the In slot change, using the "reverse following the link" function);

• Trigger: allows to force sending values on rising edge;

• Out: the output slot, the current value of read/write register;

• In: the register input slot;

• Submenu: the panel submenu number;

• Point No: the submenu point number;

• Point Display Name: allows to set the 4 characters submenu point LCD display name (only ASCII characters);

• Point Visibility: allows to activate or deactivate the point on the display;

• Point Editable: enables or disables the editing of the point;

• Point True Text: allows to set the 4 characters LCD display text in the true state (only ASCII characters);

• Point False Text: allows to set the 4 characters LCD display text in the false state (only ASCII characters);

• Point Priority: allows to set the displaying priority on the LCD screen (starting from the lowest value);

• Config Trigger: sends configuration parameters to the device components on rising edge.

The SubmenuBoolean component has the following right-click menu actions:

• Set True: sets the In slot to true and sends it to the submenu point;

• Set False: sets the In slot to false and sends it to the submenu point;

• Write: sends the In state to the submenu point;

• Read: reads the LP panel submenu point value and sets the Out slot;

• Send Value: sends the user value to the submenu point without changing the input slot, from the pop-up window;

• Read Config: reads the submenu point configuration parameters from the LP panel (Point Display Name, Point Visibility, Point True Text, Point False Text, Point Priority);

• Write Config: writes the submenu point configuration parameters to the LP panel (Point Display Name, Point Visibility, Point True Text, Point False Text, Point Priority).