-
I/O Modules - Firmware - Update -
I/O Modules - Firmware - Downgrade -
I/O Modules - iSMA Configurator - Connecting with the module, reading and saving values -
I/O Modules - iSMA Configurator - BACnet IP - Automatic device search -
I/O Modules - iSMA Configurator - BACnet MS/TP - Automatic device search -
I/O Modules - iSMA Configurator - Modbus TCP/IP - Automatic device search -
I/O Modules - iSMA Configurator - Modbus RTU - Automatic device search -
I/O Modules - iSMA Configurator - Copying device settings -
I/O Modules - Restoring default settings -
I/O Modules - BACnet - Change of Value -
I/O Modules - Bootloader - Manual start-up -
I/O IP Modules - BACnet IP - Work with the protocol -
I/O RS Modules - BACnet MS/TP - Work with the protocol -
I/O IP Modules - Modbus TCP/IP - Work with the protocol -
I/O RS Modules - Modbus RTU - Work with the protocol -
I/O IP Modules - Modbus Gateway - Preparation for work -
MINI I/O Modules - Special Applications (Modbus) -
MINI and MAX I/O Modules - Manual control of digital and analog outputs -
IO Modules - Sensors - Compatibility of iC I/O modules with PT100 and PT1000 sensors -
IO Modules - Sensors - Configuring NTC 10k type 2 temperature sensor in Celsius -
IO Modules - Inputs and Outputs - Maximizing accuracy in analog signal transmission -
IO Modules - Inputs - Current measurements using universal inputs -
IO Modules - Outputs - Lifetime of IO modules with relay outputs -
IO Modules - Network - Modbus RTU wiring guidelines for iC controllers -
IO Modules - Network - Performance in iSMA-B-MIXxx-IP daisy chain configurations -
I/O Modules - Power supply - Device does not turn on -
I/O Modules - BACnet - The module is not discovered by BACnet scanner -
I/O Modules - Modbus TCP - Problem with simultaneous communication -
I/O Modules - Modbus - The UpTime registers receives negative values -
I/O Modules - Gateway - Communication problem -
I/O Modules - Network - IP module freezing after performing a network scan -
I/O Modules - Communication - Problem with communication in Modbus or BACnet over RS and IP -
I/O Modules - Communication - Problem with modules entering the bootloader mode -
I/O Modules - Bootloader - Problem of the module falling into the bootloader mode -
I/O Modules - Inputs and outputs - Problem with spontaneously changing IO values -
I/O Modules - Sensors - Flickering reading of the temperature sensor -
I/O Modules - Sensors - Problem with temperature readings -
I/O Modules - Meters - Meters do not count pulses -
I/O Modules - Web server - Connection problem -
I/O Modules - Web server - Problems with port forwarding -
I/O Modules - iSMA Configurator - Problem with connection -
FAQ
