The VAV Configuration is a tool especially designed to work with the VAV14-IP controller. It allows to configure the parameters of the VAV14-IP controller in three areas:
-
VAV application,
-
airflow settings,
-
balancing.
Opening the VAV Configurator
The VAV Configurator is accessible under a dedicated button.
Before opening the VAV Configurator, it is required to start a BACnet IP transmission. Normally, a start-transmission prompt will be displayed automatically after pressing the VAV Configurator button:
Confirm the pop-up window and the BACnet IP transmission will be started automatically.
Note
In case there are any problems with an automatic start of the BACnet IP transmission, start it manually. Find out more here.
If BACnet IP communication is not started, the VAV Configurator button is not active.
Discovering Devices
The next required step is discovering devices. Use a dedicated button in the left top corner of the VAV Configurator window:
Warning!
For the discovering process to be successful, make sure that the subnet mask of the PC is compliant with the subnet mask of the device to be discovered. Network parameters of the controller can be checked and/or changed in the Ethernet component (System container).
