iSMA-B-2D
For the iSMA-B-2D Light controller, the iClib palette includes input points for controlling light switches and DALI networks, PIR sensors in the LLC mode, motion sensors, and presence detectors and output points for controlling light outputs.
iSMA-B-2D1B
For the iSMA-B-2D1B Light and Blind controller, the iClib palette includes input points for controlling light switches and DALI networks, blind movement, motion sensors, and presence detectors and output points for controlling light and blind outputs.
VAV14-IP
For the VAV14-IP Variable Air Volume controller, the iClib palette includes config and proxy points for the default VAV application.
Proxy and config points
Proxy points are BACnet points configured as proxy and placed under the Points folder. These consume Niagara license points.
Config points are BACnet points configured as config and placed under the Config folder. These points do not consume Niagara license points.
VAV14-IP points available in the iClib library are required to properly commission and configure the VAV14-IP controller using the iC Device Manager (iCDM) service. The service requires the BACnet points available in the iClib library for a proper operation.
For more information, please see the VAV14-IP Software user manual.
iSMA-B-FCU
For the iSMA-B-FCU Fan Coil Unit controller, the iClib palette includes points for controlling temperature and fan, second stage heating/cooling, inputs and outputs management, LCD operating, and network settings.
iSMA-B-LP
For the iSMA-B-LP room panel, the iClib palette includes points for controlling temperature, CO2, and humidity sensors, occupancy and fan menus settings, LCD and keypad settings, and time and device configuration.
Touch Point
For the Touch Point panel, the iClib palette includes points for controlling temperature, CO2, and humidity sensors, occupancy and fan menus settings, LCD and keypad settings, and time and device configuration.
Control Point
For the Control Point panel, the iClib palette includes points for controlling temperature, CO2, and humidity sensors, occupancy and fan menus settings, LCD and keypad settings, and time and device configuration.
iSMA-B-MG-IP
For the MG-IP Meter Gateway, the iClib palette includes points for M-Bus network and module settings.
iSMA-B-W0202
For the iSMA-B-W0202 wireless module, the iClib palette includes points for inputs, outputs, and device configuration.
MINI/MIX/MAX Modules
For the iSMA-B-MINI/MIX/MAX modules, the iClib palette includes points for inputs, outputs, and device configuration.
SfAR-S/SfAR-1M
For SfAR-S and SfAR-1M Modbus modules, the iClib palette includes points for inputs, outputs, and device configuration.
EBV
For the EBV actuators, the iClib palette includes points for device configuration, alarms and diagnostics configuration, input points for modulating control and output points for feedback output signal, configuration of the dynamic balancing functions and temperature control loop, and for energy functions and power control.
MVC503R-MB
For MVC actuators, the iClib palette includes points for device configuration, alarms and diagnostics configuration, and inputs and outputs configuration.
MVE-2-RS
For the MVE actuators, the iClib palette includes points for device configuration, alarms and diagnostics configuration, input points for modulating control and output points for feedback output signal, configuration of setpoints, temperature sensors, and temperature control loop, and for energy functions.
