Step 1: Installation

Supported Niagara Versions

nE2 Link is dedicated to Niagara 4 and supports Niagara 4.11 and higher.

Required Modules

In order to work properly, the nE2 Link requires the following modules:

• nE2Link-rt.jar,

• nE2Link-ux.jar,

• nE2Link-wb.jar.

Contact the authorized iSMA CONTROLLI distributor to get the latest modules.

Installation

Niagara Workbench

nE2 Link can work directly on local Workbench stations. In order to use it correctly, follow the steps below:

1. Close the Workbench.

2. Copy the nE2link-rt.jar, nE2link-ux.jar, and nE2link-wb.jar files to the Niagara modules directory. Default Path: C:\Niagara\Niagara-4.x.x\modules.

3. Reopen the Workbench.

4. Connect to the local Platform using Workbench and restart the station.

Niagara Controller

It is possible to use the nE2 Link directly on a Niagara controller, such as MAC36 or JACE.

1. In Workbench, connect to the controller's Platform.

2. Open the Software Manager.

3. Locate the nE2link-rt and nE2link-ux modules in the list and select them.

4. Click the Install button at the bottom of the window.

5. Click the Commit button at the bottom of the window.

6. The modules will be installed on the station, and the list will reload when the process is complete.

7. Verify the nE2link modules are marked as “Up to Date”.

8. Restart the Niagara station.

By following these steps, the nE2 Link modules will be successfully installed, enabling to leverage the full capabilities of the nano EDGE ENGINE devices within the Niagara 4 environment.