LpSubmenuBoolean
This page is a source for LpSubmenuBoolean (AAC).
Warning!
Component applicable only for the LP panel.
The LpSubmenuBoolean component is responsible for reading/writing and configuration of a single (one of 8 points) Boolean parameter, which is placed in the LP panel submenus. There are 6 submenus in LP panel: Temperature, Fan, Light, Blind, Alarm, and Occupancy, and each submenu can have up to 8 Boolean points.
The LpSubmenuBoolean component has the following slots:
- Status: shows the point’s status;
- Fault Cause: shows the fault cause description;
- Fault Status: shows the point error status true: point read/write error);
- Enable: enables or disables the point (true: enabled, false: disabled);
- Poll Frequency: allows to set the reading poll frequency (fast, normal, slow);
- Write Type: allows to set the writing mode (COV: only on input change, COV_PollFrequency: on the In slot change and periodically, PollFrequency: only periodically, COV_LinkSet: on the In slot change, using the "reverse following the link" function);
- Trigger: allows to force sending values on rising edge;
- Out: the output slot, the current value of read/write register;
- In: the register input slot;
- Submenu: the panel submenu number;
- Point No: the submenu point number;
- Point Display Name: allows to set the 4 characters submenu point LCD display name (only ASCII characters);
- Point Visibility: allows to activate or deactivate the point on the display;
- Point Editable: enables or disables the editing of the point;
- Point True Text: allows to set the 4 characters LCD display text in the true state (only ASCII characters);
- Point False Text: allows to set the 4 characters LCD display text in the false state (only ASCII characters);
- Point Priority: allows to set the displaying priority on the LCD screen (starting from the lowest value);
- Config Trigger: sends configuration parameters to the device components on rising edge.
The LpSubmenuBoolean component has the following right-click menu actions:
- Set True: sets the In slot to true and sends it to the submenu point;
- Set False: sets the In slot to false and sends it to the submenu point;
- Write: sends the In state to the submenu point;
- Read: reads the LP panel submenu point value and sets the Out slot;
- Send Value: sends the user value to the submenu point without changing the input slot, from the pop-up window;
- Read Config: reads the submenu point configuration parameters from the LP panel (Point Display Name, Point Visibility, Point True Text, Point False Text, Point Priority);
- Write Config: writes the submenu point configuration parameters to the LP panel (Point Display Name, Point Visibility, Point True Text, Point False Text, Point Priority).