Commissioning
Once the VAV14-IP controller is connected and configured in scope of device and networks parameters, proceed to working with application. The VAV14-IP controller is equipped with a pre-loaded application, which suits most of the VAV boxes available on the market (VAV14-IP as a Configurable Controller).
Credentials
With the default application on the controller, the VAV14-IP default credentials are:
Username: admin
Password: Admin123!
For more information, please see: Default Communication Settings and Credentials.
It also offers the possibility of further application enhancement or even building a user-custom application from scratch (VAV14-IP as a Freely-programmable Controller), which makes the controller suitable for most advanced VAV systems.
To proceed, select the tool, which is most suited for user requirements and continue to configuring of the application or building a new one.
Tool | App configuration | Flow settings |
|---|---|---|
S3 DIP switch | - | |
iSMA Configurator | ||
Control Point | ||
iC Device Manager | ||
iC Tool | ||
BACnet objects/Modbus registers | ||
Warning!
Please keep in mind that the setting of the first switch on the S3 DIP switch is vital for the configuration possibilities:
switch 1 on the S3 DIP switch set to ON: configuration of the fan, reheater, and perimeter types (and referring parameters) possible only from the S3 DIP switch,
switch 1 on the S3 DIP switch set to OFF: configuration of the fan, reheater, and perimeter types (and referring parameters) possible from the other tools: Control Point VAV/BACnet/Modbus/iC Configurator/iC Device Manager.
The S3 DIP switch setting holds priority over other tools. If it is set to ON, no change made to the mentioned parameters in any other tool (Control Point VAV or software) will be written to the controller!