Analog Output Registers
State of Analog Outputs Operating as Digital Outputs (40019)
Setting a true value of a particular bit of this 16-bit register causes setting the maximum output voltage (10 V) on the corresponding output and setting the corresponding register with analog output value (40121-40126) to 0.
Bits of the register correspond to the following analog outputs.
No. of Bit in the Register | No. of Analog Output |
|---|---|
0 | 1 |
1 | 2 |
2 | 3 |
3 | 4 |
4 | 5 |
5 | 6 |
Value of Analog Output 1-6 (for MIX Series 40121-40126), 1-4 (for MINI Series 40121-40124),
These 16-bit registers contain the value of analog output voltage in mV.
Default State of the Analog Outputs (Digital) (40144)
Setting a true value of a particular bit of this 16-bits register sets the maximum voltage (10 V) on the corresponding analog output after turning the power on or resetting the watchdog.
Bits of the register correspond to the following analog outputs:
No. of Bit in the Register | No. of Analog Output |
|---|---|
0 | 1 |
1 | 2 |
2 | 3 |
3 | 4 |
4 | 5 |
5 | 6 |
Default State of Analog Outputs 1-6 (for MIX Series: 40145-40150), 1-4 (for MINI Series: 40145-40148)
These 16-bit registers contain the values of voltage in mV, which appear on the analog outputs after turning the power on or resetting the watchdog.
Configuration Mode of Analog Outputs 1-6 (for MIX Series: 40168-40173), 1-4 (for MINI Series: 40168-40171)
These 16-bit registers contain information about the mode of the analog outputs according to the following table:
Register Value | Description |
|---|---|
0 (default) | Voltage output 0-10 V |
1 | PWM 1Hz |
2 | PWM 10Hz |
3 | PWM 100Hz |
4 | PWM 0.1Hz |
5 | PWM 0.01Hz |
Hand Control Status of Analog Outputs (30015)
This register is available only for modules with the manual control of analog outputs.
No. of Bit in Register | Description |
|---|---|
0, 1 | Hand status of outputs 1 |
2, 3 | Hand status of outputs 2 |
4, 5 | Hand status of outputs 3 |
6, 7 | Hand status of outputs 4 |
Value of the Hand Status | Status Description |
|---|---|
0 | AUTO |
1 | HAND CONTROL |
The current value of the output in the hand mode determines registers from 30125 to 30128.
Hand Control Value of 1-4 Analog Outputs (for MINI Series: 30125-30128)
The registers contain a percentage value of the manual control for outputs from 1 to 4.