Skip to main content
Skip table of contents

Installation of iSMA NTPClient Kit

To install the iSMA NTPClient kit, import the kits to the iSMA Tool software (possibly as part of the package of the various kits in a zip file). To do this, use an application from the Sedona -> Import Sedona Files.

After a successful import of the files, upload the files to your device using the Kit Manager application from the Sedona Tools package.

WARNING! Before programming the Sedona NTPClient, please check if the latest kit version is used. The latest kit is available on the iSMA CONTROLLI support web site: ismacontrolli.com.

Sedona installer

Installing Kit

After a successful import of all packages, upload the files to your device using the Kit Manager application from the Device Managers tab.

To install a selected kit:

Step 1: Open the iSMA Tool, right click on the device and choose the Kit Manager;

Step 2: The kits on the Sedona device can be managed in the Kit Manager;

Step 3: Select the iSMA NTPClient kit, then click Update;

Step 4: The components are installed successfully.

Installing the kit

Removing Kit

To remove the selected kit:

Step 1: Open the iSMA Tool, right click on the device and choose the Kit Manager;

Step 2: Uncheck the iSMA NTPClient kit, then click Upgrade;

Step 3: The components are uninstalled successfully.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.