Hardware Requirements
-
Processor: latest generation
-
RAM: 2 GB
-
Operating system: Win7, Win10
-
USB-RS485 serial converter (LIBO-USB)
Configurator Installation Procedure
The software is provided with a self-installing file: "MVC503R-MB Manager". After the installation, the software is ready for use.
LIBO-USB Serial Converter Installation
LIBO-USB is a USB to RS422 / 485 converter. It supports communication with 2/4 wire RS485. This device has a removable terminal block for connection to the device and 2 LEDs that indicate the transmission and reception of data in progress. To operate in 485 mode it is necessary to set the following DIP switches to ON:
-
RS-485 transmission
-
Echo OFF
-
2-Wire communication
For a Modbus connection with MVC503R-MB, the correct terminals to be used are:
-
TDA (minus)
-
TDB (plus)
-
GND
The device needs the installation of the drivers either by using the CD-ROM inserted in the box of LIBO-USB or by downloading the drivers from the network (http://www.bb-elec.com/USOPTL4).
Setup
The software can be started through the icon on the Desktop or through the Start → All path Programs → MVC503RMB Configurator → Configurator menu.