Introduction
This tool allows to configure and monitor the EBV valve for a proper system commissioning, monitoring and trouble shooting.
The connection between the computer and the actuator can be done either by using a USB/RS485 converter (CONV-USB-RS485) with a serial communication bus and Modbus protocol (RTU) or by the microUSB port.
Two different configuration tools are available:
-
the Modbus Configurator suitable for the configuration and real-time monitoring of the valve by Modbus protocol (RTU); the USB/RS485 converter (CONV-USB-RS485) is needed;
-
the USB Configurator suitable for the configuration and diagnostic of the valve (not suitable for real-time monitoring) by USB; a simple microUSB–USB cable is needed.
Revision History
|
Rev. |
Date |
Description |
|---|---|---|
|
1.0 |
9 Apr 2021 |
First edition |
|
1.1 |
7 May 2021 |
Added the management of the upgrade firmware via USB |
|
1.2 |
10 Sep 2021 |
Updated baud rate table (removed baud rates 38400 and 57600) |
|
1.3 |
21 Mar 2022 |
Added management of the electronic emergency return board Inserted pictures with the iSMA CONTROLLI background Updated document with the iSMA CONTROLLI layout |
|
1.4 |
22 Aug 2022 |
Updated the pictures of the Diagnostic and Maximization ΔT tabs |
|
1.5 |
17 Nov 2022 |
Added Modbus database table |
|
1.6 |
9 Feb 2024 |
Updated Modbus database |
|
1.7 |
3 Nov 2025 |
Software name changed to "EBV Configurator" and updated 0-14-15 Modbus address |
Revision history