Occupancy Submenu Registers
Warning!
Please note that the following table contains registers for all series of the Control Point panels.
Modbus address | Decimal address | Hex address | Register name | Access | Description | |||
|---|---|---|---|---|---|---|---|---|
41266 | 1265 | 0x4F1 | SETTINGS_MENU_ACTIVE_POINTS | Read/write, memory | Number of active parameters in the submenu | |||
40099 | 98 | 0x62 | SETTINGS_NUMERIC1_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41269 | 1268 | 0x4F4 | SETTINGS_NUMERIC1_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
40812 | 1270 | 0x4F6 | SETTINGS_NUMERIC1_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41272 | 1271 | 0x4F7 | SETTINGS_NUMERIC1_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41273 | 1272 | 0x4F8 | SETTINGS_NUMERIC1_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41274 | 1273 | 0x4F9 | SETTINGS_NUMERIC1_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41275 | 1274 | 0x4FA | SETTINGS_NUMERIC1_CONFIGURATION | Read/write, memory | Bit | Parameter | 0 | 1 |
0 | Active | Not active (default) | Active | |||||
2 | First point active | No decimal place (default) | One decimal place active | |||||
3 | Second point active | No decimal place (default) | Two decimal places active | |||||
4 | Third point active | No decimal place (default) | Three decimal places active | |||||
6 | C unit active | Not active (default) | Active | |||||
7 | F unit active | Not active (default) | Active | |||||
8 | Pa unit active | Not active (default) | Active | |||||
9 | Lx unit active | Not active (default) | Active | |||||
10 | ppm unit active | Not active (default) | Active | |||||
11 | m3/h unit active | Not active (default) | Active | |||||
12 | %Rh unit active | Not active (default) | Active | |||||
13 | l/s unit active | Not active (default) | Active | |||||
14 | % unit active | Not active (default) | Active | |||||
15 | h unit active | Not active (default) | Active | |||||
40100 | 99 | 0x63 | SETTINGS_NUMERIC2_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41278 | 1277 | 0x4FD | SETTINGS_NUMERIC2_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41280 | 1279 | 0x4FF | SETTINGS_NUMERIC2_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41281 | 1280 | 0x500 | SETTINGS_NUMERIC2_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41282 | 1281 | 0x501 | SETTINGS_NUMERIC2_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41283 | 1282 | 0x502 | SETTINGS_NUMERIC2_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41284 | 1283 | 0x503 | SETTINGS_NUMERIC2_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40101 | 100 | 0x64 | SETTINGS_NUMERIC3_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41287 | 1286 | 0x506 | SETTINGS_NUMERIC3_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41289 | 1288 | 0x508 | SETTINGS_NUMERIC3_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41290 | 1289 | 0x509 | SETTINGS_NUMERIC3_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41291 | 1290 | 0x50A | SETTINGS_NUMERIC3_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41292 | 1291 | 0x50B | SETTINGS_NUMERIC3_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41293 | 1292 | 0x50C | SETTINGS_NUMERIC3_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40102 | 101 | 0x65 | SETTINGS_NUMERIC4_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41296 | 1295 | 0x50F | SETTINGS_NUMERIC4_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41298 | 1297 | 0x511 | SETTINGS_NUMERIC4_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41299 | 1298 | 0x512 | SETTINGS_NUMERIC4_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41300 | 1299 | 0x513 | SETTINGS_NUMERIC4_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41301 | 1300 | 0x514 | SETTINGS_NUMERIC4_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41302 | 1301 | 0x515 | SETTINGS_NUMERIC4_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40103 | 102 | 0x66 | SETTINGS_NUMERIC5_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41305 | 1304 | 0x518 | SETTINGS_NUMERIC5_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41307 | 1306 | 0x51A | SETTINGS_NUMERIC5_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41308 | 1307 | 0x51B | SETTINGS_NUMERIC5_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41309 | 1308 | 0x51C | SETTINGS_NUMERIC5_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41310 | 1309 | 0x51D | SETTINGS_NUMERIC5_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41311 | 1310 | 0x51E | SETTINGS_NUMERIC5_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40104 | 103 | 0x67 | SETTINGS_NUMERIC6_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41314 | 1313 | 0x521 | SETTINGS_NUMERIC6_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41316 | 1315 | 0x523 | SETTINGS_NUMERIC6_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41317 | 1316 | 0x524 | SETTINGS_NUMERIC6_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41318 | 1317 | 0x525 | SETTINGS_NUMERIC6_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41319 | 1318 | 0x526 | SETTINGS_NUMERIC6_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41320 | 1319 | 0x527 | SETTINGS_NUMERIC6_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40105 | 104 | 0x68 | SETTINGS_NUMERIC7_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41323 | 1322 | 0x52A | SETTINGS_NUMERIC7_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41325 | 1324 | 0x52C | SETTINGS_NUMERIC7_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41326 | 1325 | 0x52D | SETTINGS_NUMERIC7_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41327 | 1326 | 0x52E | SETTINGS_NUMERIC7_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41328 | 1327 | 0x52F | SETTINGS_NUMERIC7_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41329 | 1328 | 0x530 | SETTINGS_NUMERIC7_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40106 | 105 | 0x69 | SETTINGS_NUMERIC8_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41332 | 1331 | 0x533 | SETTINGS_NUMERIC8_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41334 | 1333 | 0x535 | SETTINGS_NUMERIC8_STEP | Read/write, memory | Step of the parameter value change. Default: 0. | |||
41335 | 1334 | 0x536 | SETTINGS_NUMERIC8_LOW_LIMIT | Read/write, memory | Minimum value of the parameter. Default: 0. | |||
41336 | 1335 | 0x537 | SETTINGS_NUMERIC8_HIGH_LIMIT | Read/write, memory | Maximum value of the parameter. Default: 0. | |||
41337 | 1336 | 0x538 | SETTINGS_NUMERIC8_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the submenu | |||
41338 | 1337 | 0x539 | SETTINGS_NUMERIC8_CONFIGURATION | Read/write, memory | See the table in SETTINGS_NUMERIC1_CONFIGURATION (41275) | |||
40113 | 112 | 0x70 | SETTINGS_BOOLEAN_ALL_PRESENT_VALUE | Read/write, memory | Bit | Parameter | 0 | 1 |
0 | BOOLEAN1_PRESENT_VALUE | Not active (default) | Active | |||||
1 | BOOLEAN2_PRESENT_VALUE | Not active (default) | Active | |||||
… | … | … | … | |||||
6 | BOOLEAN7_PRESENT_VALUE | Not active (default) | Active | |||||
7 | BOOLEAN8_PRESENT_VALUE | Not active (default) | Active | |||||
40162 | 161 | 0xA1 | SETTINGS_BOOLEAN1_ PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41341 | 1340 | 0x53C | SETTINGS_BOOLEAN1_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41343 | 1342 | 0x53E | SETTINGS_BOOLEAN1_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41345 | 1344 | 0x540 | SETTINGS_BOOLEAN1_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41347 | 1346 | 0x542 | SETTINGS_BOOLEAN1_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41348 | 1347 | 0x543 | SETTINGS_BOOLEAN1_CONFIGURATION | Read/write, memory | Bit | Parameter | 0 | 1 |
0 | ACTIVE | Not active (default) | Active | |||||
1 | EDITABLE | Not editable | Editable (default) | |||||
40163 | 162 | 0xA2 | SETTINGS_BOOLEAN2_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41351 | 1350 | 0x546 | SETTINGS_BOOLEAN2_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41353 | 1352 | 0x548 | SETTINGS_BOOLEAN2_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41355 | 1354 | 0x54A | SETTINGS_BOOLEAN2_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41357 | 1356 | 0x54C | SETTINGS_BOOLEAN2_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41358 | 1357 | 0x54E | SETTINGS_BOOLEAN2_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40164 | 163 | 0xA3 | SETTINGS_BOOLEAN3_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41361 | 1360 | 0x550 | SETTINGS_BOOLEAN3_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41363 | 1362 | 0x552 | SETTINGS_BOOLEAN3_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41365 | 1364 | 0x554 | SETTINGS_BOOLEAN3_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41367 | 1366 | 0x556 | SETTINGS_BOOLEAN3_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41368 | 1367 | 0x557 | SETTINGS_BOOLEAN3_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40165 | 164 | 0xA4 | SETTINGS_BOOLEAN4_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41371 | 1370 | 0x55A | SETTINGS_BOOLEAN4_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41373 | 1372 | 0x55C | SETTINGS_BOOLEAN4_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41375 | 1374 | 0x55E | SETTINGS_BOOLEAN4_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41377 | 1376 | 0x560 | SETTINGS_BOOLEAN4_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41378 | 1377 | 0x561 | SETTINGS_BOOLEAN4_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40166 | 165 | 0xA5 | SETTINGS_BOOLEAN5_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41381 | 1380 | 0x564 | SETTINGS_BOOLEAN5_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41383 | 1382 | 0x566 | SETTINGS_BOOLEAN5_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41385 | 1384 | 0x568 | SETTINGS_BOOLEAN5_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41387 | 1386 | 0x56A | SETTINGS_BOOLEAN5_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41388 | 1387 | 0x56B | SETTINGS_BOOLEAN5_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40167 | 166 | 0xA6 | SETTINGS_BOOLEAN6_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41391 | 1390 | 0x56E | SETTINGS_BOOLEAN6_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41393 | 1392 | 0x570 | SETTINGS_BOOLEAN6_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41395 | 1394 | 0x572 | SETTINGS_BOOLEAN6_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41397 | 1396 | 0x574 | SETTINGS_BOOLEAN6_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41398 | 1397 | 0x575 | SETTINGS_BOOLEAN6_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40168 | 167 | 0xA7 | SETTINGS_BOOLEAN7_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41401 | 1400 | 0x578 | SETTINGS_BOOLEAN7_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41403 | 1402 | 0x57A | SETTINGS_BOOLEAN7_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41405 | 1404 | 0x57C | SETTINGS_BOOLEAN7_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41407 | 1406 | 0x57E | SETTINGS_BOOLEAN7_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41408 | 1407 | 0x57F | SETTINGS_BOOLEAN7_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||
40169 | 168 | 0xA8 | SETTINGS_BOOLEAN8_PRESENT_VALUE | Read/write, memory | Current value of the parameter | |||
41411 | 1410 | 0x582 | SETTINGS_BOOLEAN8_NAME (32-bit) | Read/write, memory | User-defined name of the parameter | |||
41413 | 1412 | 0x584 | SETTINGS_BOOLEAN8_TRUE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s true value | |||
41415 | 1414 | 0x586 | SETTINGS_BOOLEAN8_FALSE_TEXT (32-bit) | Read/write, memory | Text for the parameter’s false value | |||
41417 | 1416 | 0x588 | SETTINGS_BOOLEAN8_PRIORITY | Read/write, memory | Priority of the parameter for sequence of display in the main menu | |||
41418 | 1417 | 0x589 | SETTINGS_BOOLEAN8_CONFIGURATION | Read/write, memory | See the table in SETTINGS_BOOLEAN1_CONFIGURATION (41348) | |||