Skip to main content
Skip table of contents

First Logging In

Applicable to OS version 1.0.0.4592

The first time the user logs in to the device in the iC Tool, the software requires to change the default password.

Once the user initiates connecting the device, the iC Tool displays the authentication window:

Connecting the device

The authentication window

Enter default credentials:

  • username: admin
  • password: admin

Confirm with OK and proceed to the next authentication step, which is setting an individual user’s password. After pressing OK, the following dialog window appears, leading the user to change the password:

First change of password warning

Confirm the dialog window with OK, and proceed to a Change Password dialog window:

Change Password window

For the first logging in, the user is required to enter:

  • Username: admin;
  • Password: new password set by the user, at least 8 characters long, at least one digit, at least one capital letter.

While typing a new password, the dialog window verifies if the password is compliant with requirements (fulfilled requirement is marked in green):

Fulfilled password requirements

Note: If a wrong username or password is inserted in the authentication window, the following notice pops up:

Wrong credentials notice

Click retry and enter correct credentials.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.