MVE-2-RS Configuration Tool User Manual
Introduction
The MVE-2-RS Configurator allows to configure and monitor the MVE-2-RS actuator for a proper system commissioning, monitoring, and troubleshooting.
The connection between a computer and actuator can be established either by using a USB/RS485 converter (iSMA-B-CVT-RS485) with a serial communication bus and the Modbus protocol (RTU) or by the micro USB port.
Two different configuration tools are available:
the Modbus Configuration tool suitable for the configuration and real-time monitoring of the actuator by the Modbus RTU protocol; the USB/RS485 converter (iSMA-B-CVT-RS485) is required;
the USB Configuration tool suitable for the configuration and diagnostic of the actuator (not suitable for real-time monitoring) by USB; a simple micro USB-USB cable is required.
Revision History
Rev. | Date | Description |
---|---|---|
1.0 | 19 Jul 2022 | First edition |
1.1 | 9 Nov 2022 | Updated table of Modbus register database |
1.2 | 25 May 2023 | Updated the default stop bit (it was 2 it become 1) |