Register Name

Default Value

COUNTER

0

USER BAUD RATE

7680 (76800 bps)

STOP BITS

1

DATA BITS

8

PARITY BITS

0

RESPONSE DELAY

0

WATCHDOG TIME

0 (disabled)

STATE OF THE DIGITAL OUTPUTS AFTER START

0

STATE OF THE ANALOG OUTPUTS (DIGITAL) AFTER START

0

STATE OF THE ANALOG OUTPUTS AFTER START

0

UNIVERSAL INPUT CONFIGURATION

1

INPUT FILTER TIME CONSTANT

2

UNIVERSAL INPUT RESOLUTION

0

ANALOG OUTPUT CONFIGURATION

0

Only for IP modules

USERNAME

platform

PASSWORD

1000

IP ADDRESS

192.168.1.123

MASK

255.255.255.0

GATEWAY

192.168.1.1

HTTP PORT

80

MODBUS TCP PORT

502

MODBUS TCP TIMEOUT

60s

RS485 TIMEOUT

1000ms

RS485 BIASING RESISTORS (MINI only)

DISABLED

SEND MODBUS ERRORS

ENABLED

BACNET ID

826001

BACNET UDP PORT

47808 (0xBAC0)

Default values

Restoring Default Settings

To restore the default configuration of all registers, follow the steps below:

  • turn off the power supply;
  • set section 6 of the S3 switch to on;
  • turn on the power supply, the power LED will start blinking;
  • switch section 6 of the S3 switch to off to restore the default settings. To cancel the reset, turn off the power, and switch section 6 of the S3 switch to the off position.