List of Modbus Registers
Modbus Address | Decimal Address | Hex Address | Register Name | Access | Description | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
30001 | 0 | 0x00 | VERSION AND DEVICE TYPE | Read-only | |||||||||||||
30002 | 1 | 0x01 | DEVICE ADDRESS (state of switch) | Read-only | |||||||||||||
30003 | 2 | 0x02 | BAUD RATE AND PROTOCOL (state of switch) | Read-only | |||||||||||||
30004 | 3 | 0x03 | MODBUS RECEIVED FRAMES COUNTER (32 – bits) | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30006 | 5 | 0x05 | MODBUS ERROR FRAMES COUNTER 32 – bits) | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30008 | 7 | 0x07 | MODBUS TRANSMITTED FRAMES COUNTER (32 – bits) | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30012 | 11 | 0x0B | UP TIME | Up device time in sec | |||||||||||||
30015 | 14 | 0x0E | M-BUS RECEIVED FRAMES COUNTER | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30017 | 16 | 0x10 | M-BUS TRANSMITTED FRAMES COUNTER | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30019 | 18 | 0x12 | M-BUS ALARMS COUNTER | Read-only | Default state is 0. Reset at the device start and change of transmission parameters. | ||||||||||||
30130 | 129 | 0x81 | HARDWARE_VERSION | Read-only | The current hardware version of a device | ||||||||||||
30131 | 130 | 0x82 | MAC_ADDRESS (32 – bits) | Read-only | The MAC address of a device | ||||||||||||
40001 | 0 | 0x00 | DEVICE ACTIONS | Read/write | Allows to enable 1 of 3 device actions | ||||||||||||
40023 | 22 | 0x16 | M-BUS BAUD RATE (32 – bits) | Read/write memory | Baud rate for M-Bus | ||||||||||||
40025 | 24 | 0x18 | M-BUS CONNECTION TIMEOUT (32 – bits) | Read/write memory | Timeout of M-Bus connection (Default 2000 ms) | ||||||||||||
40136 | 135 | 0x87 | BAUD RATE | Read/write memory | Transmission speed is defined by the user calculated using the formula: The value is considered only when sections 1, 2 and 3 of S3 switch is in the OFF position The default value is 7680 (76800 bps) | ||||||||||||
40137 | 136 | 0x88 | STOP BITS | Read/write memory | Supported values are 1 and 2 The default value 1 | ||||||||||||
40138 | 137 | 0x89 | DATA BITS | Read/write memory | Supported values are 7 and 8 The default value 8 | ||||||||||||
40139 | 138 | 0x8A | PARITY BIT | Read/write memory | Parity Bit (40139) The default value is 0 (no parity) Allowed values:
| ||||||||||||
40140 | 139 | 0x8B | RESPONSE DELAY | Read/write memory | Delay in ms before sending response The default value is 0. |