Skip to main content
Skip table of contents

Main Menu User-defined Parameters

There are 8 numeric and 8 Boolean user-defined parameters available in the main menu. All of them are read-only locally in the room panel (read/write type available in the higher level system), and they are written to the EEPROM memory (register values are remembered after the room panel restart or power failure).

Each parameter has to be activated to be visible. Active parameters are displayed in the main menu in a specified sequence.

After a room panel restart, user-defined parameters are not displayed until they are overwritten from a higher level system (programmable controller).

The main menu user-defined parameters are implemented for displaying additional information.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.