Skip to main content
Skip table of contents

iSMA-B-FCU Quick Start-up User Manual

Introduction

This manual explains basic procedures for using the controller, setting up the built-in application and information on connection details. It is recommended to read this manual before using the controller. For detailed operating procedures and troubleshooting information, see user manuals: FCU Programming, FCU Application, FCU Hardware, FCU Updater.

Revision History

Rev.

Date

Description

1.3

19 Jul 2024

Updated information about the default settings (I/O configuration cleared while restoring to default settings)

1.2

21 Feb 2023

  • Updated information about the default settings (values stored in the EEPROM memory cleared while restoring to default settings)

  • Updated FP panel references

1.1

21 Apr 2022

  • Rebranded

  • Updated Touch Point panel references

1.0

5 Mar 2021

First edition

Revision history

Overview

Box Contents

The iSMA-B-FCU controller comes in a box along with the connectors and the iSMA-B-FCU installation instruction.

Tools

To safely and properly set up the iSMA-B-FCU controller, the flat head screwdriver 3.0 x 0.5 mm is necessary.

Dimensions and Mounting

The controller dimensions and mounting details are presented on the figure 1. There are no additional requirements for controller’s orientation and placement.

FCU dimensions and mounting

Technical Specification

For detailed technical specification, see the FCU Hardware manual.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.