Introduction
The iC Actuator Configurator allows the user to configure and monitor the following actuators family:
-
MVE-2-RS
-
MVC-2-RS
-
EBV
It is used for proper commissioning, monitoring, and troubleshooting.
The connection between a computer and an actuator can be established either by using a USB/RS485 converter (iSMA-B-CVT-RS485) with a serial communication bus and the Modbus protocol (RTU) or by the USB port.
Revision History
|
Rev. |
Date |
Description |
|---|---|---|
|
1.0 |
08 April 2025 |
First edition |
|
1.1 |
03 June 2026 |
Management of the Kvs parameter for the Custom Energy Valve; added a check to ensure the actuator’s firmware version matches that available on the server; added warning messages for pressure and temperature sensors |
Revision history