EBV Configuration Tool User Manual
Introduction
This tool allows to configure and monitor the EBV valve for a proper system commissioning, monitoring and trouble shooting.
The connection between the computer and the actuator can be done either by using a USB/RS485 converter (CONV-USB-RS485) with a serial communication bus and Modbus protocol (RTU) or by the microUSB port.
Two different configuration tools are available:
- the Modbus Configuration tool suitable for the configuration and real-time monitoring of the valve by Modbus protocol (RTU); the USB/RS485 converter (CONV-USB-RS485) is needed;
- the USB Configuration Tool suitable for the configuration and diagnostic of the valve (not suitable for real-time monitoring) by USB; a simple microUSB–USB cable is needed.
Revision History
| Rev. | Date | Description |
|---|---|---|
| 1.0 | 9 Apr 2021 | First edition |
| 1.1 | 7 May 2021 | Added the management of the upgrade firmware via USB |
| 1.2 | 10 Sep 2021 | Updated baud rate table (removed baud rates 38400 and 57600) |
| 1.3 | 21 Mar 2022 | Added management of the electronic emergency return board Inserted pictures with the iSMA CONTROLLI background Updated document with the iSMA CONTROLLI layout |
| 1.4 | 22 Aug 2022 | Updated the pictures of the Diagnostic and Maximization ΔT tabs |
| 1.5 | 8 Nov 2022 | Added the table of Modbus register database |
Revision history