This tool allows to configure and monitor the EBV valve for a proper system commissioning, monitoring and trouble shooting.
The connection between the computer and the actuator can be done either by using a USB/RS485 converter (CONV-USB-RS485) with a serial communication bus and Modbus protocol (RTU) or by the microUSB port.
Two different configuration tools are available:
- the Modbus Configuration tool suitable for the configuration and real-time monitoring of the valve by Modbus protocol (RTU); the USB/RS485 converter (CONV-USB-RS485) is needed;
- the USB Configuration Tool suitable for the configuration and diagnostic of the valve (not suitable for real-time monitoring) by USB; a simple microUSB–USB cable is needed.
|1.0||9 Apr 2021||First edition|
|1.1||7 May 2021||Added the management of the upgrade firmware via USB|
|1.2||10 Sep 2021||Updated baud rate table (removed baud rates 38400 and 57600)|
|1.3||21 Mar 2022|
Added management of the electronic emergency return board
Inserted pictures with the iSMA CONTROLLI background
Updated document with the iSMA CONTROLLI layout
|1.4||22 Aug 2022|
Updated the pictures of the Diagnostic and Maximization ΔT tabs