Skip to main content
Skip table of contents


The SineWave component generates a sine wave as a numeric out.

SineWave component


The SineWave component has the following slots:

  • Status: shows the component's status;
  • Enable: enables or disables the component;
  • Out: the sine wave value calculated based on set parameters;
  • Period: allows to set the length of one cycle of the component's function;
  • Amplitude: allows to set an amplitude for the output values function;
  • Offset: allows to set an offset for the output values function.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.